400 KG Injection Molding Temperature Controller Rapid Heating Cooling
Single Function Rapid Heating And Rapid Cooling Mold Temperature Controller Specification
| Item | Unit | JD-D-90 |
| Power Source | V | 380V；50HZ |
| heating power | KW | 2.2 |
| cooling power | KW | 4 |
| Total Power | KW | 95 |
| Flow rate of cooling pump | L/MIN | 133 |
| Flow rate of heating pump | L/MI N | 33 |
| Inlet/outlet of cooling | MM | DN32 |
| Soften water connector | MM | DN25 |
| Diverter connector | | 12 in 12 out |
| Dimensions | MM | 1650*750*1500 |
| Dimensions including Extension pipes | MM | 2050*750*1500 |
| Net Weight | KG | 400 |
| Applicable Tonnage of injection machine | T | 300-800 |
| Machine Function | Applicable to single color or double colors RHCM Moulding process of injection machine |
| Optional Function | Remote failure monitoring and solving function |
How to choose a proper rapid heating and cooling machine?
When parts need rapid heating and cooling injection ;
Parts need one side high gloss only ;
Part flatness requirement is not very strict ;
make choice according to the tonage of injection moulding machine;
Select the corresponding specifications of single function rapid heating and cooling mold temperature controller.
Below machine , there is only one set of temperature output.
When parts need rapid heating and cooling injection ,and requires two sides high gloss ;
Part flatness requirement is strict ;
Requires different front and rear mold temperatures .
Requires high gloss dual-color injection ;
make choice according to the tonage of injection moulding machine;
Below photo ,there are two sets of temperature output ;
Front and rear mold temperatures can be adjusted independently ;
Can do high gloss mono color or dua-color injection.
Product
Rapid heating and cooling injection technology features and advantages
1. Eliminate welding line , Shrinkage mark and flow mark.
2. Enhance the gloss on the surface of parts , so as to achieve mirror , high-black and high gloss effect , completely solve the plastic part shrinkage issue.
3. Improve the tensile , compressive strength and surface anti-scratch performance.
4. Reduce subsequent processing procedures(such as painting and electroplating) increase yield by 20-30%
5. Eliminate floating fiber surface of glass fiber parts. Thin wall forming can improve of molding fluidity . Improve product quality and strength ,and reduce the injection cycle of thick wall moulding by more than 40%.
6. For electroplate parts, it can improve part mirror effect, eliminate the welding lines , reduce the crack mark of parts to be plated and the defective rate of plating production.
7. Eliminate parts stress mark, release internal stress of parts , improve rib marks of texture parts .
8. Reduce injection pressure and prolong injection machine's lifespan.
9. Eliminate hot runner mark and make injection part more perfect
Product Tags:
|
|
400 KG Injection Molding Temperature Controller Rapid Heating Cooling Images
|
